angular distortion
英 [ˈæŋɡjələ(r) dɪˈstɔːʃn]
美 [ˈæŋɡjələr dɪˈstɔːrʃn]
网络 角变形; 角度变形; 角变量; 角歪
双语例句
- At last, as the heat in the metal around weld bead is nonhomogeneous during the welding process, it causes the unhomogeneous transverse contraction along the thickness of the steel ring, which may lead to the angular distortion and the distortion of the roundness.
最后，焊接时近缝区金属由于加热不均匀，导致横向收缩沿钢圈厚度上分布不均匀而产生角变形，从而使圆度发生变化。 - On the basis of autocollimation principle, combining with grating interference principle, a new autocollimation interferometry method was put forward which can measure three-dimensional angular distortion.
以自准直原理基础，将光栅干涉原理引入，提出了一种能对船体三维变形测量的自准直干涉法。 - Marc FE analysis software, and computed results such as welding temperature field, residual stress distributing and angular distortion are drew out and discussed.
Marc有限元分析软件对T形接头的焊接过程进行了实时三维数值模拟，并对焊接温度场、残余应力分布以及角变形计算结果进行了分析说明。 - Experimental tests were carried out to measure the angular distortion and the distributions of residual stresses in welded joints.
钛合金激光焊接变形和残余应力实验结果与数值计算结果吻合性较好。 - Development of the Time-code Generator for Angular Distortion Measuring System
角变形测量系统中的时统部件底层开发与设计 - Determination and Theoretical Analysis of Additional Stresses due to Stagger Toes and Angular Distortion
球罐错边、角变形引起的附加应力的测定与理论分析 - Typical Cases of Safety Assessment of Edge Offset and Angular Distortion In-service Pressure Vessel
在用压力容器角变形和错边安全性分析的典型案例 - Stress Analysis of Pressure Vessels With Angular Distortion
压力容器角变形的应力分析 - The deficiency in the current code ( JB1127-82) is pointed out and the allowable limit of angular distortion is recommended.
针对现行规范（JB1127&82）的一些不足，推荐了角变形的容限。 - Angular distortion is a serious problem in multi-pass weld. However, research on it was very lacking.
角变形一直是厚板多层多道焊过程中的突出问题，然而有关这方面的研究报道并不多见。